(888) 816-7468
info@flameoffcoatings.com
CART (0)

Concrete Guard Pro

Return Policy

Commercial Concrete Sealer and Heavy Duty Floor Coating

  • Heavy Duty Commercial Sealer - 5,000+ hours acid resistance protects warehouses, garages and parking structures
  • Penetrating Concrete Protection - Quarter-inch molecular bond outperforms surface coatings
  • Industrial Floor Coating - Resists oil, fuel, hydraulic fluids and chemical spills
  • Chloride and Salt Barrier - Defends against de-icing salts, freeze-thaw and moisture intrusion
  • 5-Year Limited Manufacturers Warranty - Lab-tested +1,200 PSI adhesion

Overview

Forklift traffic, chemical spills, and seasonal freeze-thaw cycles destroy unprotected concrete in as little as 18 months-costing facility managers thousands in repairs and operational downtime.

Concrete Guard Pro stops this damage cycle with a nano-based penetrating formula that bonds at the molecular level, creating quarter-inch-deep or greater protection that outlasts surface coatings by 3-5x. The invisible barrier maintains your concrete's natural appearance.

Lab-Tested Performance Data

  • Adhesion Strength: +1,200 PSI (polished concrete substrate)
  • Solvent Resistance: 1,000 MEK double rubs, no effect (ASTM D5402)
  • UV Stability: < 0.5 dE color shift after 1,000 hours (ASTM G154)
  • Shore D Hardness: 72 (ASTM D2240)

Environmental and Compliance Standards

  • Temperature Range: -200°F to +350°F (cryogenic to high-heat processing)
  • Chemical Resistance: oil, fuel, jet fuel, hydraulic fluids, caustic wash solutions, bird and animal waste
  • Protection Class: water intrusion, chloride penetration, deicing salt damage, salt spray (coastal applications)

Recommended Applications

Distribution and Logistics: Amazon-style fulfillment centers, factory floors, cold storage, and loading docks subject to forklift Class IV+ traffic.

Food and Beverage: USDA-inspected meat processing plants, FDA-registered pharmaceutical facilities, and brewery production floors requiring 21 CFR Part 110 compliant surfacing.

Automotive and Industrial: Service bays, manufacturing floors exposed to hydraulic fluid, and parking structures treated with calcium chloride deicers.

Call (888) 715-1747 or email info@flameoff.com for details

Product Details

  • Coverage: 400-600 sq ft/gallon
  • Application: HVLP or airless sprayer, or roller. Check surface compatibility before application
  • VOC Content: 100 g/L (SCAQMD Rule 1113 compliant)
  • Finish Options: gloss
  • Cure Time: touch dry 2 hrs | Full cure 7 days (avoid rain for 48 hrs)
  • Container Size: 5-gallon
  • Shipping: ships in 3-5 business days. Expedited shipping not available

FAQ

Unlike thick, film-forming epoxies that can look "plastic", Concrete Guard Pro penetrates the substrate to form a covalent bond while maintaining the natural texture of the concrete. It is a single-component system that is UV stable - preventing the yellowing common with epoxies - and allows for a faster return to service.

Yes, it is a high-gloss clear coating.

Yes, the product is UV stable and performs well both indoors and outdoors. Accelerated UV testing (ASTM G154, 1000 hours) shows minimal change (dE < 0.5).

If applied properly at the recommended thickness, it generally maintains the natural texture of the surface, avoiding the slipperiness associated with thick epoxies.

Durability depends on usage and exposure (coastal/inland, chemicals, salt, abrasion). It comes with a 5-year warranty under recommended applications, but will perform longer under many conditions.

Yes. It helps revive color and provides an easy-to-clean gloss finish. Ensure old sealers are removed first for proper adhesion.

Absolutely. It is highly resistant to acids and petrochemicals including gasoline, oils, and hydraulic fluids.

Yes, it is non-permeable to water, saltwater, and other fluids.

Yes. Permanent marker can be wiped off with soap and water; spray paint may require a commercial removal solution.

Average penetration is approximately 6 mm (2-3 mm for polished concrete), forming a covalent bond with the substrate.

Apply to a clean, dry surface. Use a commercial-grade HVLP (1.0-1.3 tip) airless sprayer (.111, .211, .311 tip). It can also be applied with a high-density ultra-smooth roller.

It provides approximately 50% more coverage than typical epoxy systems. The theoretical coverage is 640-800 sq. ft. per gallon at 0.7-0.75 mils DFT.
Related Products